Next I apply that exposed 15 cm of decals using a squeegee, applying it from the middle (same side as the tape). Next I remove the protective paper on one end for about 15 cm and cut it off. Then I use masking tape to tightly tape it stuck, approximately on the middle on each side. When applying these, I usually just lay in onto the surface it's supposed to be applied. I carefully applied the large decals on the sides of the cabinet, trying to avoid as many air pockets as possible. Once decided I sent the file off to the printer.Īnd just in time when I needed it, I finally received the vinyl decals from the printer. I made the template in Adobe Photoshop, but I UV unwrapped my 3D model to fit the same template so that we could easily preview the different designs on a 3D model. So, since I was building this machine for a friend, we went through a few rounds of graphic design to have it exactly as he wanted. Then a few rounds of sanding using a fairly rough grain to correct any uneven curves. I used a circular saw with a guide for the straight outer edges, and a jigsaw for the smooth corners and those gaps above the control panels. I also made a paper template for the gaps above the control panels that will only have exposed glass to expose the control panels for the players. Once I received the finished glass, I traced the shape of the glass onto a large piece of MDF (this to make sure it'll have the very same shape, in case there were any discrepancies during production. It'll need those additional wooden connection pieces as MDF will easily bend and pull the screws out if being stressed or juggled ever so slightly. I also used wood glue and also some additional screws on the edges between the MDF edges. I used small pieces of wood as connection pieces for the screws. It's just a simple box and was no big deal to put together. While waiting for the glass to be made, I started making the main body.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |